Cadillac XT6 (USA / CAN)
Transfer case fluid capacity & service interval
Cadillac XT6 (USA / CAN) uses transfer case fluid with a capacity of 0.85 liter. Four configurations are covered in the data.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| XT6 2.0 AWD (2023- ) |
|
| XT6 3.6 V6 AWD (2022- ) |
|
| XT6 2.0 AWD (2020-2022) |
|
| XT6 3.6 V6 AWD (2019-2022) |
|
Additional Notes
- The Cadillac XT6 (USA / CAN) transfer case fluid capacity is 0.85 liter across all listed AWD configurations, covering both the 2.0 and 3.6 V6 engine variants.
- A capacity figure of 0.85 liter is consistent with a service fill value, representing the amount of fluid required during a routine drain-and-refill rather than a full overhaul of the transfer case assembly.
- All four configurations carry a normal use condition designation, meaning the listed 0.85-liter capacity applies under standard operating circumstances rather than severe-duty cycles.
- The 2.0 AWD variant enters the specifications at the 2020 model year, while the 3.6 V6 AWD variant is listed from 2019, reflecting a one-year difference in when each engine configuration appears in the data.
- The 3.6 V6 AWD has two separate specification entries: one covering 2019-2022 and another starting at 2022, both sharing the same 0.85-liter transfer case capacity under normal use conditions.
- The 2.0 AWD similarly carries two entries, one for 2020-2022 and one starting at 2023, with no variation in the 0.85-liter capacity figure between the two periods.
- All listed configurations are identified with a transferbox note, indicating the capacity value applies specifically to the transfer case unit rather than any associated axle or differential assembly.