BYD QIN
Manual transmission fluid capacity & service interval
BYD QIN uses manual transmission fluid with a capacity range of 1,5 to 1,8 liters. Service intervals are 40000 km/24 months or 60000 km/48 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Qin (113 kW) (2019-2022) |
|
| Qin (80 kW) (2019-2022) |
|
| Qin 100 (2018-2020) |
|
Additional Notes
- The BYD Qin manual transaxle fluid capacity varies by variant, with the 113 kW and 80 kW versions requiring 1.5 liters and the Qin 100 requiring a notably larger 1.8 liters.
- A 1.5-liter transaxle fill is a relatively modest capacity, consistent with compact manual transmission units found in lower-displacement hybrid drivetrains.
- The Qin 100 (2018-2020) carries a 1.8-liter transaxle capacity, which is 0.3 liters greater than the 113 kW and 80 kW variants, suggesting a physically larger or differently configured gearbox assembly.
- Both the 113 kW and 80 kW variants share an identical service interval of 40,000 km or 24 months under normal use conditions, despite differing in power output.
- The Qin 100 (2018-2020) carries a significantly longer service interval of 60,000 km or 48 months under normal use conditions, which is 20,000 km and 24 months beyond the interval specified for the 113 kW and 80 kW variants.
- All three configurations specify normal use conditions, meaning the stated intervals are not adjusted for severe driving environments such as frequent towing, extreme temperatures, or stop-and-go traffic.
- The 113 kW and 80 kW variants share production years of 2019-2022, while the Qin 100 spans 2018-2020, making 2018 exclusive to the Qin 100 among the listed configurations.
- All three rows identify the fluid system as a transaxle, manual type, which refers to a combined transmission and differential unit typical of front-wheel-drive layouts.