BYD Han

Brake fluid capacity & service interval

BYD Han brake fluid capacity ranges from 0,95 to 1,35 liters. Service intervals include checks every 20000 km or 12 months and fluid changes every 40000 km or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Han DM-i (2024- )
  • Use: Normal
  • Capacity 1 liter
  • Change 40000 km/ 24 months
Han 85,4 kWh (2022- )
  • Use: Normal
  • Capacity 0,95-1,35 liter
  • Check 20000 km/ 12 months
  • Change 40000 km/ 24 months

Additional Notes

  • The BYD Han 85.4 kWh lists a brake fluid capacity range of 0.95-1.35 liters, which reflects the typical variation between a service top-up fill and the total hydraulic system volume rather than a single fixed value.
  • The Han DM-i specifies a fixed brake fluid capacity of 1 liter, placing the system volume within the upper portion of the range seen on the 85.4 kWh variant.
  • Both configurations share a change interval of 40,000 km or 24 months under normal use conditions, indicating a common fluid replacement cycle across the two drivetrains.
  • The Han 85.4 kWh includes a dedicated check interval of 20,000 km or 12 months, which falls at the midpoint between fluid changes and serves as an intermediate inspection point for the hydraulic brake system.
  • No separate check interval is listed for the Han DM-i, whereas the 85.4 kWh variant carries an explicit 20,000 km or 12-month inspection requirement alongside the same 40,000 km change schedule.

Other Systems