BYD ETP3

Coolant capacity & service interval

BYD ETP3 uses coolant with a capacity range of 3,8 to 4,2 liters. Change intervals are 100000 km or 48 months. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
ETP3 (2023- )
  • Use: Normal
  • Capacity 3,8-4,2 liter
  • Change 100000 km/ 48 months

Additional Notes

  • The BYD ETP3 cooling system capacity is listed as a range of 3.8 to 4.2 liters, which reflects a service fill tolerance rather than a fixed volume, accounting for variables such as trapped air pockets during refilling procedures.
  • The 3.8 to 4.2 liter range indicates that the precise amount of coolant accepted by the system can vary slightly depending on how thoroughly air is purged from the circuit during the fill process.
  • Under normal use conditions, the coolant change interval is set at 100,000 km or 48 months, whichever comes first, meaning both a distance threshold and a time-based limit apply simultaneously to the service schedule.
  • The 48-month time limit on the coolant change interval reflects the chemical degradation of coolant additives over time, which occurs regardless of how many kilometers have been driven.

Other Systems