Brilliance FRV/BS2
Brake fluid capacity & service interval
Brilliance FRV/BS2 uses brake fluid with a capacity of 0,7 liter. Service intervals include checking at 5000 km/ 3 months or 10000 km/ 6 months, and changing at 30000 km/ 18 months or 40000 km/ 24 months. The data covers 8 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| FRV / BS2 1.3 (63 kW), SY7130KSAA/KSBAA/FSBAA (2011- ) |
|
| FRV / BS2 1.3 (63 kW), SY7130KSAA/KSBAA/FSBAA (2011- ) |
|
| FRV / BS2 1.3 (63 kW), SY7130KSAA/KSBAA/FSBAA (2011- ) |
|
| FRV / BS2 1.3 (63 kW), SY7130KSAA/KSBAA/FSBAA (2011- ) |
|
| FRV / BS2 1.3 (65 kW), SY7130W1SBAA (2011- ) |
|
| FRV / BS2 1.3 (65 kW), SY7130W1SBAA (2011- ) |
|
| FRV / BS2 1.3 (65 kW), SY7130W1SBAA (2011- ) |
|
| FRV / BS2 1.3 (65 kW), SY7130W1SBAA (2011- ) |
|
Additional Notes
- The Brilliance FRV/BS2 hydraulic brake system holds 0.7 liter across both the 63 kW (SY7130KSAA/KSBAA/FSBAA) and 65 kW (SY7130W1SBAA) engine variants, indicating a consistent reservoir and circuit volume between the two configurations.
- A 0.7 liter capacity for a brake fluid system is a relatively modest figure, consistent with a compact passenger car hydraulic circuit covering the master cylinder reservoir and associated lines.
- Under normal use conditions, both engine variants share a check interval of 10,000 km or 6 months, whichever comes first, paired with a change interval of 40,000 km or 24 months.
- The initial service condition carries a shortened check interval of 5,000 km or 3 months for both variants, reflecting the closer monitoring typically applied during a vehicle's early service period.
- Under severe use conditions, the change interval shortens to 30,000 km or 18 months for both the 63 kW and 65 kW variants, compared to the 40,000 km or 24 months specified under normal use.
- The severe, first change only condition specifies a change interval of 40,000 km or 24 months, which matches the normal use change interval rather than the standard severe interval of 30,000 km or 18 months, applying exclusively to the initial replacement event under severe conditions.
- The check interval under severe conditions remains at 10,000 km or 6 months for both variants, identical to the normal use check interval, meaning only the change interval differs between normal and severe service schedules.