BMW X2, F39 (USA)
Coolant capacity & service interval
The BMW X2, F39 (USA) uses coolant with a capacity of 6.4 liters. Four configurations of this model are covered in the data.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| X2 sDrive28i (2019-2024) |
|
| X2 xDrive28i (2019-2024) |
|
| X2 sDrive28i (2017-2019) |
|
| X2 xDrive28i (2017-2019) |
|
Additional Notes
- The BMW X2 F39 (USA) carries a cooling system capacity of 6.4 liters across all listed configurations, covering both the sDrive28i and xDrive28i variants from 2017 onward.
- A 6.4-liter cooling system capacity is consistent with a four-cylinder turbocharged engine package, where the cooling circuit includes the engine block, cylinder head, heater core, and expansion tank volume.
- The sDrive28i and xDrive28i share an identical 6.4-liter cooling system capacity, meaning the addition of all-wheel-drive hardware in the xDrive28i does not alter the coolant fill requirement.
- Both the 2017-2019 and 2019-2024 model year groupings of the sDrive28i carry the same 6.4-liter capacity, indicating no change in cooling system volume across the mid-cycle specification update.
- All four rows are designated under normal use conditions, which in coolant service contexts typically refers to standard operating environments without the elevated thermal demands associated with severe-duty or towing applications.
- The 6.4-liter figure represents a full cooling system fill, the total volume required when the system is drained and refilled completely, rather than a partial top-off quantity.