BMW X1, F48 (USA)
Coolant capacity & service interval
The BMW X1, F48 (USA) model uses coolant with a capacity range of 6.8-7.7 liters. Four configurations of this model are covered in the data.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| X1 sDrive28i (2019-2022) |
|
| X1 xDrive28i (2019-2022) |
|
| X1 sDrive28i (2015-2019) |
|
| X1 xDrive28i (2015-2019) |
|
Additional Notes
- The BMW X1 F48 (USA) cooling system capacity is listed as a range of 6.8 to 7.7 liters across all four configurations covered in the specifications.
- A capacity expressed as a range rather than a fixed value typically reflects variation introduced by air pockets, residual fluid, and component differences within the same cooling circuit during a service fill.
- The sDrive28i and xDrive28i variants share an identical cooling system capacity range of 6.8 to 7.7 liters, indicating no measurable difference between the rear-wheel-drive and all-wheel-drive configurations in terms of coolant volume.
- Across the 2015-2019 and 2019-2022 model year groupings, the cooling system capacity remains unchanged at 6.8 to 7.7 liters for both the sDrive28i and xDrive28i, reflecting consistency through the mid-cycle period covered by the specifications.
- All four rows carry a normal use condition, meaning the capacity figures of 6.8 to 7.7 liters are associated specifically with standard operating conditions rather than a severe-duty classification.