BMW X1, E84 (USA)
Coolant capacity & service interval
BMW X1, E84 (USA) coolant capacity ranges between minimum and maximum values. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| X1 sDrive28i (2013-2016) |
|
| X1 xDrive28i (2013-2016) |
|
| X1 sDrive28i (2009-2013) |
|
| X1 xDrive28i (2009-2013) |
|
| X1 xDrive35i (2009-2016) |
|
Additional Notes
- All five configurations across the BMW X1 E84 (USA) lineup share a coolant fill specification described as "between min and max," which refers to maintaining the coolant level within the marked range on the expansion tank rather than filling to a fixed measured volume.
- The sDrive28i variant spans two distinct generation brackets in the specifications: 2009-2013 and 2013-2016, each carrying the same "between min and max" cooling system fill guidance under normal use conditions.
- The xDrive28i follows the same two-bracket structure as the sDrive28i, with 2009-2013 and 2013-2016 entries both specifying a level-based fill rather than a discrete capacity figure under normal use.
- The xDrive35i is listed as a single continuous range from 2009-2016, without a mid-cycle split in the specifications, and shares the same level-based coolant fill standard under normal use conditions as the other configurations.
- A "between min and max" specification is characteristic of a top-up or service fill procedure, where the technician references the reservoir markings rather than measuring a precise fluid volume, distinguishing it from a full system drain-and-refill capacity figure.
- All entries across the 2009-2016 model range are designated for normal use conditions, meaning the coolant level guidance applies to standard operating environments without a separate severe-duty interval or fill variation listed in the specifications.