BMW 6 series Coupé, F13 (EU)
Automatic transmission fluid capacity & service interval
BMW 6 series Coupé, F13 (EU) uses automatic transmission fluid with a capacity of 8,5 liters. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 640i xDrive Coupé (2013-2017) |
|
| 640i Coupé (2010-2017) |
|
| 650i Coupé (2010-2012) |
|
| 650i xDrive Coupé (2010-2012) |
|
Additional Notes
- The BMW 6 Series Coupé F13 automatic transmission fluid capacity is 8.5 liters across all listed configurations, a figure that represents a service fill rather than a full overhaul capacity, meaning the transmission is not fully drained during a standard fluid change.
- The 640i Coupé covers the 2010-2017 model years, while the 650i Coupé and 650i xDrive Coupé are each listed only for 2010-2012, reflecting a narrower production window for those variants within the F13 generation.
- The 640i xDrive Coupé carries a starting year of 2013, making it a later addition to the F13 lineup compared to the rear-wheel-drive 640i Coupé, which begins in 2010.
- All four configurations share the same 8.5-liter automatic transmission fluid capacity under normal use conditions, indicating no variation in fluid volume requirements between the inline-six 640i variants and the V8-powered 650i variants.
- The xDrive designation denotes BMW's all-wheel-drive system, yet the automatic transmission fluid capacity for the 640i xDrive Coupé and 650i xDrive Coupé remains at 8.5 liters, identical to their rear-wheel-drive counterparts.
- All listed rows specify normal use conditions, meaning the 8.5-liter capacity figure applies to standard operating environments rather than severe-duty cycles such as frequent towing or extreme temperature exposure.