BMW 5 series, G30 / F90 (USA)

Automatic transmission fluid capacity & service interval

BMW 5 series, G30 / F90 (USA) requires automatic transmission fluid with a capacity of 8,8 liters. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

Type	Specifications
530i (2019-2023)	Use: Normal Capacity 8,8 liter Code: ZF GA8HP50Z 8/1
530i xDrive (2019-2023)	Use: Normal Capacity 8,8 liter Code: ZF GA8HP50X 8/1
530i (2016-2019)	Use: Normal Capacity 8,8 liter Code: ZF GA8HP50Z 8/1
530i xDrive (2016-2019)	Use: Normal Capacity 8,8 liter Code: ZF GA8HP50X 8/1

The BMW 5 Series G30 automatic transmission fluid capacity is listed at 8.8 liters across all four configurations covered by the specifications.
An 8.8-liter figure for automatic transmission fluid typically represents a full system fill, accounting for fluid held within the torque converter, valve body, and transmission pan combined.
The 530i rear-wheel-drive configuration carries the same 8.8-liter capacity across both the 2016-2019 and 2019-2023 model year groupings, indicating no change in transmission fluid volume between those periods.
The 530i xDrive all-wheel-drive variant also shares the 8.8-liter capacity figure, meaning the addition of the xDrive drivetrain hardware does not alter the automatic transmission fluid fill amount relative to the rear-wheel-drive model.
All four rows in the specifications are designated under normal use conditions, meaning the listed 8.8-liter capacity applies specifically to standard operating environments rather than severe-duty cycles.