BMW 2 series, G42 / G87 (USA)
Automatic transmission fluid capacity & service interval
BMW 2 series, G42 / G87 (USA) uses automatic transmission fluid with a capacity of 9,28 liters. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 230i xDrive (2022- ) |
|
| M240i (2022- ) |
|
| 230i (2021- ) |
|
| M240i xDrive (2021- ) |
|
Additional Notes
- The BMW 2 Series G42/G87 automatic transmission fluid capacity is 9.28 liters across all four configurations covered in the specifications, meaning the 230i, 230i xDrive, M240i, and M240i xDrive share an identical total system fill volume.
- A 9.28-liter figure represents a full transmission fill, which accounts for fluid held throughout the entire unit including the torque converter, valve body, and internal passages, rather than a partial drain-and-fill service quantity.
- All four configurations carry a normal use condition designation, meaning the specified 9.28-liter capacity applies under standard operating circumstances rather than a severe-duty or first-change-only service scenario.
- The 230i xDrive and M240i xDrive all-wheel-drive variants share the same 9.28-liter automatic transmission fluid capacity as the rear-wheel-drive 230i and M240i, indicating the xDrive transfer function does not alter the transmission fluid volume in the specifications provided.
- The M240i and M240i xDrive, despite carrying a higher-output engine compared to the 230i variants, are listed with the same 9.28-liter transmission capacity, pointing to a shared transmission unit across the G42/G87 lineup in the specifications.
- The 230i carries a starting year of 2021 in the specifications, while the 230i xDrive and M240i both carry a starting year of 2022, making the 230i and M240i xDrive the earliest-listed configurations within the G42/G87 automatic transmission data.