BAIC Senova X55, I

Brake fluid capacity & service interval

BAIC Senova X55, I uses brake fluid with a capacity of 1 liter. The service interval is 40000 km or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
X55 (2016-2018)
  • Use: Normal
  • Capacity 1 liter
  • Change 40000 km/ 24 months
X55 (2016-2018)
  • Use: Normal
  • Capacity 1 liter
  • Change 40000 km/ 24 months

Additional Notes

  • The BAIC Senova X55 I carries a brake fluid capacity of 1 liter for the hydraulic brake and clutch system, which is a typical reservoir fill volume for a combined brake and clutch circuit sharing a single fluid supply.
  • Under normal use conditions, the specified change interval is 40,000 km or 24 months, whichever comes first, meaning time elapsed and distance driven are both active limits for fluid replacement.
  • The 24-month time-based interval reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time and lowers the boiling point of the fluid regardless of mileage accumulated.
  • The 1-liter capacity figure represents a service fill quantity for the hydraulic system reservoir rather than a full system overhaul volume, as brake circuit bleeding and caliper replacement procedures would involve additional fluid beyond what the reservoir holds.
  • The same 40,000 km and 24-month interval applies consistently across the 2016-2018 model years of the X55 I, with no variation in service schedule between those years according to the specifications.

Other Systems