BAIC Senova X25

Manual transmission fluid capacity & service interval

BAIC Senova X25 manual transmission fluid capacity ranges from 1,5 to 2 liters. Service intervals consist of 30000 km or 24 months and 40000 km or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
X25 (2021- )
  • Use: Normal
  • Capacity 1,5-1,6 liter
  • Change 40000 km/ 24 months
  • Code: F15 5/1
X25 (2021- )
  • Use: Normal
  • Capacity 1,8-2 liter
  • Change 30000 km/ 24 months
  • Code: MF513A 5/1

Additional Notes

  • The BAIC Senova X25 manual transaxle carries two distinct capacity figures across configurations: one ranging from 1.5 to 1.6 liters and another ranging from 1.8 to 2.0 liters, indicating that different transmission variants are fitted depending on the configuration.
  • The 1.5-1.6 liter capacity range is paired with a change interval of 40,000 km or 24 months under normal use conditions, whichever comes first.
  • The 1.8-2.0 liter capacity range corresponds to a shorter distance-based interval of 30,000 km, also under normal use conditions and within the same 24-month time limit.
  • Both capacity entries share the same 24-month time-based ceiling, meaning the calendar interval does not vary between the two transmission variants despite the difference in fluid volume and kilometer interval.
  • The wider capacity band of 1.8-2.0 liters suggests a larger or differently geared transaxle assembly, which in manual transmission service typically reflects a heavier-duty unit requiring a greater fluid volume to maintain adequate lubrication across all gear sets and bearings.

Other Systems