BAIC Senova D70

Manual transmission fluid capacity & service interval

BAIC Senova D70 manual transmission fluid capacity is 1,9-2,1 liters. Service intervals occur every 40000 km or 24 months. Data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
D70 (100 kW) (2017- )
  • Use: Normal
  • Capacity 1,9-2,1 liter
  • Change 40000 km/ 24 months
  • Code: 6/1
D70 (120 kW) (2017- )
  • Use: Normal
  • Capacity 1,9-2,1 liter
  • Change 40000 km/ 24 months
  • Code: 6/1

Additional Notes

  • The BAIC Senova D70 manual transaxle fluid capacity is specified as a range of 1.9 to 2.1 liters, which reflects a service fill tolerance rather than a fixed overhaul volume, allowing for minor variation during a drain-and-refill procedure.
  • Both the 100 kW and 120 kW variants of the D70 share an identical capacity range of 1.9 to 2.1 liters for the manual transaxle, indicating no difference in gearbox fluid volume between the two power outputs.
  • The change interval for the manual transaxle fluid is set at 40,000 km or 24 months under normal use conditions, meaning whichever threshold is reached first would trigger a fluid change.
  • The 24-month time limit paired with the 40,000 km distance interval means that a vehicle accumulating low annual mileage would still require a fluid change within two years regardless of distance traveled.
  • Both the 100 kW and 120 kW D70 configurations from 2017 onward carry the same 40,000 km or 24-month change interval under normal use, with no variation in service schedule between the two engine outputs.

Other Systems