Audi Q3, RS Q3, F3 (EU)
Coolant capacity & service interval
Audi Q3, RS Q3, F3 (EU) models utilize coolant with a capacity range between min and max. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Q3 40 TFSI quattro (140 kW) (2021- ) |
|
| Q3 45 TFSI quattro (180 kW) (2021- ) |
|
| Q3 40 TFSI quattro (132 kW) (2019- ) |
|
| Q3 40 TFSI quattro (140 kW) (2018-2021) |
|
| Q3 45 TFSI quattro (169 kW) (2018-2020) |
|
Additional Notes
- All five Q3 TFSI quattro configurations covered in the 2018-2021 period share a coolant fill specification expressed as "between min and max," meaning the cooling system does not carry a fixed volumetric capacity figure but instead relies on reservoir level markings as the reference point for correct fill.
- The Q3 40 TFSI quattro at 132 kW and the Q3 40 TFSI quattro at 140 kW represent two distinct engine output variants within the same displacement family, each carrying its own cooling system entry despite the shared TFSI designation.
- The Q3 40 TFSI quattro at 140 kW appears across two separate specification rows, one covering 2018-2021 and another starting from 2021, indicating a specification distinction tied to a production revision at that model year boundary.
- The Q3 45 TFSI quattro transitions from a 169 kW rating for the 2018-2020 period to a 180 kW rating from 2021 onward, reflecting a power output change between those two production phases while the cooling system fill method remains consistent across both.
- All entries are designated under normal use conditions, meaning none of the Q3 TFSI quattro configurations in the 2018-2021 range carry a separate severe-use coolant specification.