Audi A5, S5 Cabriolet, F57 (EU)

Manual transmission fluid capacity & service interval

Audi A5, S5 Cabriolet, F57 (EU) manual transmission fluid capacity is 1,8 liters. Service intervals include normal use. Data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

Type	Specifications
A5 Cabriolet 35 TFSI (110 kW) (2020- )	Use: Normal Capacity 1,8 liter Code: 0DJ 6/1
A5 Cabriolet 30 TDI (100 kW) (2019- )	Use: Normal Capacity 1,8 liter Code: 0DJ 6/1
A5 Cabriolet 40 TFSI (140 kW) (2019-2020)	Use: Normal Capacity 1,8 liter Code: 0DJ 6/1
A5 Cabriolet 2.0 TDI (110 kW) (2017-2019)	Use: Normal Capacity 1,8 liter Code: 0DJ 6/1
A5 Cabriolet 2.0 TFSI (140 kW) (2017-2019)	Use: Normal Capacity 1,8 liter Code: 0DJ 6/1

All five A5 Cabriolet configurations listed share a uniform manual transaxle fluid capacity of 1.8 liters, applying equally across diesel and petrol variants.
The 1.8-liter figure represents a service fill capacity, meaning the amount of fluid required when servicing the transmission without a full disassembly or overhaul procedure.
The Audi A5 Cabriolet 2.0 TDI (110 kW) and 2.0 TFSI (140 kW) both carry the 1.8-liter transaxle specification across the 2017-2019 model years, indicating no capacity difference between the diesel and petrol variants of that generation.
The A5 Cabriolet 30 TDI (100 kW), introduced from 2019, retains the same 1.8-liter transaxle capacity despite representing a lower output diesel variant compared to the earlier 110 kW TDI.
The A5 Cabriolet 35 TFSI (110 kW), introduced from 2020, shares the 1.8-liter transaxle capacity with the earlier 2.0 TFSI (140 kW), even though the two variants differ in power output.
The A5 Cabriolet 40 TFSI (140 kW), covering the 2019-2020 period, also holds the 1.8-liter transaxle specification, consistent with all other listed configurations regardless of engine designation.
All listed configurations specify normal use conditions, meaning the 1.8-liter capacity and associated service parameters apply under standard operating circumstances rather than severe or first-change-only conditions.