Audi 90 (EU)

Automatic transmission fluid capacity & service interval

Audi 90 (EU) requires automatic transmission fluid with a capacity of 3 liters. Service intervals include changing fluid every 30000 km or 24 months, checking every 30000 km or 12 months, and changing every 60000 km. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
90 2.0 (1991-1992)
  • Use: Normal
  • Capacity 3 liter
  • Check 30000 km/ 12 months
  • Change 60000 km
  • Code: 4/1
90 2.0 20V (1988-1991)
  • Use: Normal
  • Capacity 3 liter
  • Check 30000 km/ 12 months
  • Change 60000 km
  • Code: 4/1
90 2.0 (1987-1991)
  • Use: Normal
  • Capacity 3 liter
  • Change 30000 km/ 24 months
  • Code: 3/1
90 2.3 E (1987-1992)
  • Use: Normal
  • Capacity 3 liter
  • Check 30000 km/ 12 months
  • Change 60000 km
  • Code: 4/1
90 2.2 (1986-1990)
  • Use: Normal
  • Capacity 3 liter
  • Change 30000 km/ 24 months
  • Code: 3/1
90 2.0 (1985-1987)
  • Use: Normal
  • Capacity 3 liter
  • Change 30000 km/ 24 months
  • Code: 3/1
90 2.2 (1985-1986)
  • Use: Normal
  • Capacity 3 liter
  • Change 30000 km/ 24 months
  • Code: 3/1

Additional Notes

  • Across all listed Audi 90 (EU) automatic transmission configurations from 1985-1992, the service fill capacity is uniformly 3 liters. A consistent value across multiple engine variants typically reflects a shared transmission unit rather than engine-specific hardware.
  • The 90 2.0 variants from 1985-1987 and 1987-1991 share an identical service schedule: a fluid change every 30,000 km or 24 months under normal use conditions, whichever comes first. The time-based limit of 24 months means the interval is governed by calendar age as well as distance.
  • The 90 2.2 in both the 1985-1986 and 1986-1990 configurations also follows the 30,000 km or 24-month change interval under normal conditions, matching the earlier 2.0 schedule rather than the longer-interval pattern seen in later variants.
  • A shift in service structure appears with the 90 2.0 (1991-1992), the 90 2.0 20V (1988-1991), and the 90 2.3 E (1987-1992). These configurations introduce a separate fluid check interval of 30,000 km or 12 months alongside a full change interval extended to 60,000 km. The check interval is shorter in calendar terms — 12 months versus 24 — while the change interval doubles in distance terms compared to the earlier schedule.
  • The 90 2.0 20V, distinguished by a five-valve-per-cylinder engine design, carries the same 3-liter capacity and the check-plus-change service structure as the later 2.0 and 2.3 E variants, despite being a higher-performance configuration.
  • The 90 2.3 E spans the widest model year range in the dataset at 1987-1992, and throughout that entire period operates under the check-at-30,000-km and change-at-60,000-km schedule, with no intermediate revision to the service structure.
  • The transition from a single change-only interval to a two-stage check-and-change schedule, seen across several configurations, reflects a longer fluid life expectation while adding an intermediate inspection point to monitor condition before the full change is due.

Other Systems