Audi 200, C3 (EU)
Automatic transmission fluid capacity & service interval
Audi 200, C3 (EU) automatic transmission fluid capacity is 3 liter. Service intervals are 30000 km or 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 200 2.2 (1984-1985) |
|
| 200 2.1 (1983-1984) |
|
| 200 2.1 Turbo (1983-1988) |
|
Additional Notes
- Across all three configurations of the Audi 200, C3 (EU) covered in these specifications, the automatic transmission fluid capacity is 3 liters, which is a service fill figure representing the fluid volume required during a routine drain-and-refill procedure rather than a full overhaul capacity.
- The 200 2.1 carries a change interval of 30,000 km or 24 months under normal use conditions, meaning the interval applies to standard operating environments rather than demanding or high-stress driving cycles.
- The 200 2.1 Turbo shares the same 3-liter capacity and 30,000 km / 24-month interval as the naturally aspirated 2.1, indicating no differentiation in automatic transmission fluid service requirements between the turbocharged and non-turbocharged variants of the 2.1-liter engine.
- The 200 2.2, introduced in 1984, also carries a 3-liter capacity and a 30,000 km / 24-month change interval under normal use, placing it in alignment with both 2.1-liter configurations despite the displacement difference.
- The 24-month time limit paired with the 30,000 km distance interval means whichever threshold is reached first would trigger a service, a dual-condition structure common in fluid maintenance schedules to account for vehicles that accumulate low annual mileage.
- The 200 2.1 Turbo has the widest model year span in these specifications, covering 1983-1988, while the 200 2.1 is listed only for 1983-1984 and the 200 2.2 for 1984-1985.