Aro 10 (Duster)
Brake fluid capacity & service interval
Aro 10 (Duster) brake fluid capacity ranges from 0,43 to 0,5 liters. Service intervals require changes every 20000 km or 24 months. Data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 10 1.9 D (Duster) (1993-2006) |
|
| 10 1.4 (Duster) (1984-2006) |
|
Additional Notes
- The Aro 10 (Duster) brake fluid specifications cover two engine variants: the 1.4 petrol, available from 1984, and the 1.9 D diesel, available from 1993, with both running through 2006.
- The 1.4 variant carries a hydraulic brake system capacity of 0.43 liter, which represents the total fluid volume held within the brake lines, master cylinder, and calipers or wheel cylinders combined.
- The 1.9 D variant holds a slightly larger hydraulic brake system capacity of 0.5 liter, a difference that reflects the dimensional characteristics of the diesel model's braking circuit relative to the 1.4.
- Both variants share an identical service interval of 20,000 km or 24 months under normal use conditions, whichever comes first. Brake fluid absorbs moisture over time, so a time-based interval alongside a distance-based one is standard practice for hydraulic systems.
- The shared interval structure across the 1.4 and 1.9 D means the two configurations align on service scheduling despite their differing fluid capacities, which simplifies maintenance planning when both variants are considered side by side.
- The 0.43 liter capacity listed for the 1.4 is a service fill figure, indicating the volume needed to replenish or replace fluid within the existing hydraulic circuit rather than a dry-fill overhaul quantity.
- Similarly, the 0.5 liter figure for the 1.9 D represents a service fill volume for the hydraulic brake system, consistent with the same interpretation applied to the 1.4 specification.