Alfa Romeo Spider, 939 (EU)

Manual transmission fluid capacity & service interval

Alfa Romeo Spider, 939 (EU) manual transmission fluid capacity ranges from 2 to 2,8 liters. Service intervals include checks at 30000 km and 35000 km. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Spider 1750 Turbo (2009-2011)
  • Use: Normal
  • Capacity 2 liter
  • Check 35000 km
  • Code: 6/1
Spider 2.0 JTDm (120 kW) (2009-2010)
  • Use: Normal
  • Capacity 2,8 liter
  • Check 35000 km
  • Code: 6/1
Spider 2.0 JTDm (125 kW) (2009-2010)
  • Use: Normal
  • Capacity 2,8 liter
  • Check 35000 km
  • Code: 6/1
Spider 2.4 JTDm 20V (147 kW) (2008-2010)
  • Use: Normal
  • Capacity 2,8 liter
  • Check 35000 km
  • Code: 6/1
Spider 2.4 JTDm 20V (154 kW) (2008-2010)
  • Use: Normal
  • Capacity 2,8 liter
  • Check 35000 km
  • Code: 6/1
Spider 3.2 JTS V6 (2008-2010)
  • Use: Normal
  • Capacity 2,8 liter
  • Check 35000 km
  • Code: 6/1
Spider 3.2 JTS V6 Q4 (2008-2010)
  • Use: Normal
  • Capacity 2,8 liter
  • Check 35000 km
  • Code: 6/1
Spider 2.4 JTDm 20V (154 kW) (2007-2008)
  • Use: Normal
  • Capacity 2,8 liter
  • Check 30000 km
  • Code: 6/1
Spider 2.4 JTDm 20V (147 kW) (2006-2008)
  • Use: Normal
  • Capacity 2,8 liter
  • Check 30000 km
  • Code: 6/1
Spider 3.2 JTS V6 Q4 (2006-2008)
  • Use: Normal
  • Capacity 2,8 liter
  • Check 30000 km
  • Code: 6/1

Additional Notes

  • The Alfa Romeo Spider 939 (EU) manual transmission fluid specifications cover a transaxle layout across all listed configurations, meaning the gearbox and final drive share a common housing and a single fluid fill.
  • The Spider 1750 Turbo (2009-2011) carries a notably lower transaxle fluid capacity of 2.0 liters compared to the 2.8-liter figure shared by all other listed configurations, reflecting a physically smaller or differently designed transaxle unit in the turbocharged four-cylinder application.
  • A capacity of 2.8 liters applies uniformly to the 2.0 JTDm (120 kW and 125 kW), the 2.4 JTDm 20V in both power outputs, the 3.2 JTS V6, and the 3.2 JTS V6 Q4 variants, indicating a common transaxle assembly across those otherwise varied engine configurations.
  • The check interval for the 2.4 JTDm 20V (147 kW) shifted from 30,000 km for the 2006-2008 model years to 35,000 km for the 2008-2010 model years, despite the fluid capacity remaining unchanged at 2.8 liters.
  • The same interval revision from 30,000 km to 35,000 km is also present for the 2.4 JTDm 20V (154 kW), where the 2007-2008 specification lists 30,000 km and the 2008-2010 specification lists 35,000 km.
  • The 3.2 JTS V6 Q4 follows the same pattern, with a 30,000 km check interval for 2006-2008 and a 35,000 km interval for 2008-2010, while the non-Q4 3.2 JTS V6 appears only in the 2008-2010 range at 35,000 km.
  • All intervals listed are classified under normal use conditions, meaning the specified check distances apply to standard operating environments rather than more demanding or high-stress driving cycles.
  • A fluid check interval, as opposed to a full drain-and-fill interval, indicates the service action involves inspecting the fluid level and condition at the stated mileage rather than a mandatory complete fluid replacement.

Other Systems