Alfa Romeo 2600, 106 (EU)
Differential fluid capacity & service interval
Alfa Romeo 2600, 106 (EU) differential fluid capacity ranges from 2,35 to 2,4 liters. Service intervals include checks every 6000 km or 6 months and changes every 18000 km or 18 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- Across the Alfa Romeo 2600 lineup, rear differential fluid capacity falls within a narrow band, with three body styles — the Berlina, OSI, and Sprint/Spider — each specifying 2.35 liters as the service fill volume.
- The 2600 Sprint Zagato (1965-1967) carries a slightly higher rear differential capacity of 2.4 liters, distinguishing it from the other variants in the 2600 range.
- A 2.35-liter or 2.4-liter differential fill is consistent with a conventional rear axle housing of the era, where the fluid volume reflects the physical size of the differential casing rather than a high-capacity performance unit.
- All four configurations share an identical check interval of every 6,000 km or 6 months, whichever comes first, under normal use conditions.
- The fluid change interval across all 2600 variants is set at 18,000 km or 18 months under normal use, meaning the check cycle runs at exactly one-third the length of the full drain-and-refill cycle.
- The 2600 OSI (1965-1967) and 2600 Sprint Zagato (1965-1967) share the same production window, yet the OSI follows the 2.35-liter capacity specification rather than the 2.4-liter figure assigned to the Zagato body.
- The 2600 Sprint/Spider production span of 1962-1968 is the widest among the variants listed, running six years while maintaining the same 2.35-liter rear differential capacity and identical service intervals throughout.