Acura CSX (USA / CAN)

Manual transmission fluid capacity & service interval

Acura CSX (USA / CAN) manual transmission fluid capacity ranges from 1,5 to 1,7 liters. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
CSX 2.0 Type-S (CAN) (2007-2010)
  • Use: Normal
  • Capacity 1,7 liter (Dry fill)
  • Capacity 1,5 liter (Service fill)
  • Code: 6/1
CSX 2.0 (CAN) (2006-2011)
  • Use: Normal
  • Capacity 1,7 liter (Dry fill)
  • Capacity 1,5 liter (Service fill)
  • Code: 5/1

Additional Notes

  • The Acura CSX 2.0 (CAN) manual transaxle carries a dry fill capacity of 1.7 liters, which represents the total fluid volume required when filling a completely empty or freshly rebuilt unit.
  • The service fill capacity for the CSX 2.0 (CAN) manual transaxle is 1.5 liters, reflecting the smaller volume needed during a routine fluid change where residual fluid remains in the unit after draining.
  • The 0.2-liter difference between dry fill and service fill on the CSX 2.0 (CAN) manual transaxle is consistent with the typical volume of fluid that clings to internal components and does not drain fully during a standard service procedure.
  • The CSX 2.0 Type-S (CAN) manual transaxle shares identical dry fill and service fill capacities with the base CSX 2.0 (CAN), at 1.7 liters and 1.5 liters respectively, despite being a distinct performance-oriented trim.
  • Both capacity figures across the two configurations are specified under normal use conditions, meaning the values apply to standard operating environments rather than severe or high-stress driving cycles.
  • The CSX 2.0 Type-S (CAN) covers model years 2007-2010, a narrower range than the base CSX 2.0 (CAN), which spans 2006-2011.

Other Systems