Yanmar YT2

Differential fluid capacity & service interval

Yanmar YT2 differential fluid has a capacity range of 5 to 5,5 liters. Service intervals include a 50 hour check and a 300 hour change. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • YT222 (2021- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 50 hours
  • Change 300 hours
  • YT225 (2021- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 50 hours
  • Change 300 hours
  • YT228 (2021- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 50 hours
  • Change 300 hours
  • YT232 (2021- )
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 50 hours
  • Change 300 hours
  • YT235 (2021- )
  • Front
  • Use: Normal
  • Capacity 5,5 liter
  • Check 50 hours
  • Change 300 hours

Additional Notes

  • The Yanmar YT2 front differential fluid capacity is 5 liters across the YT222, YT225, YT228, and YT232 variants, indicating a moderately sized differential housing consistent with compact utility tractor front axle assemblies.
  • The YT235 front differential holds 5.5 liters, which is 0.5 liters more than the four smaller variants in the same series.
  • All five variants share a 50-hour fluid check interval under normal use conditions, a relatively short inspection cycle that reflects the operating demands placed on front differential components in tractor applications.
  • The fluid change interval is set at 300 hours across all five variants under normal use conditions, meaning the check interval at 50 hours serves as a monitoring step well ahead of the full drain-and-fill service.
  • The 300-hour change interval applies uniformly to the YT222, YT225, YT228, YT232, and YT235, with no variation in drain frequency despite the capacity difference seen in the YT235.

Other Systems