Yanmar KE

Power steering fluid capacity & service interval

Yanmar KE requires 12,5 liters of power steering fluid. Service intervals include checking at 50 hours and changing at 300 hours. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • KE-170H (2000-2010)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 12,5 liter
  • Check 50 hours
  • Change 300 hours
  • Code: 2/2
  • KE-200H (2000-2010)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 12,5 liter
  • Check 50 hours
  • Change 300 hours
  • Code: 2/2

Additional Notes

  • The Yanmar KE-170H and KE-200H both carry a combined transaxle, hydraulic system, and power steering fluid capacity of 12.5 liters, which reflects a shared reservoir arrangement rather than a dedicated standalone power steering circuit.
  • A check interval of 50 hours applies to both configurations under normal use conditions, indicating a relatively frequent monitoring schedule consistent with equipment operating in variable load environments.
  • The fluid change interval is set at 300 hours for both the KE-170H and KE-200H under normal use conditions, representing six times the check interval and suggesting the fluid is expected to remain serviceable across extended operating periods between full replacements.
  • The 12.5-liter capacity figure applies identically across both the KE-170H and KE-200H for the 2000-2010 model years, indicating no variation in reservoir sizing between the two configurations despite their differing model designations.

Other Systems