Yanmar FE

Differential fluid capacity & service interval

Yanmar FE differential fluid capacity ranges from 3,2 to 3,4 liters. Service intervals consist of a 50 hour check and a 300 hour change. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • FE-240H (2000-2010)
  • Front
  • Use: Normal
  • Capacity 3,2 liter
  • Check 50 hours
  • Change 300 hours
  • FE-280H (2000-2010)
  • Front
  • Use: Normal
  • Capacity 3,4 liter
  • Check 50 hours
  • Change 300 hours

Additional Notes

  • The Yanmar FE-240H carries a front differential fluid capacity of 3.2 liters, while the FE-280H holds 3.4 liters, placing both within a range typical of light utility vehicle front differentials.
  • Both the FE-240H and FE-280H share identical service intervals for front differential fluid under normal use conditions, with a check interval of 50 hours and a full fluid change at 300 hours.
  • The 50-hour check interval on both configurations reflects a periodic inspection rather than a fluid replacement, allowing for monitoring of fluid level and condition between full change cycles.
  • The 300-hour change interval applies specifically to normal use conditions on both the FE-240H and FE-280H, meaning operation within standard load and terrain parameters as defined by that use classification.
  • The 0.2-liter difference in front differential capacity between the FE-240H and FE-280H corresponds to the mechanical differences between the two model variants across the 2000-2010 production span.

Other Systems