Valtra (Valmet) N4 Hitech

Differential fluid capacity & service interval

Valtra (Valmet) N4 Hitech differential fluid capacity is 7,5 to 8 liters. Service intervals include checking at 600 hours and changing at 1200 hours or 12 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • N104 Hitech (2015-2021)
  • Front
  • Use: Normal
  • Capacity 7,5-8 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • N114 Hitech (2015-2021)
  • Front
  • Use: Normal
  • Capacity 7,5-8 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • N114e Hitech (2015-2021)
  • Front
  • Use: Normal
  • Capacity 7,5-8 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • N124 Hitech (2015-2021)
  • Front
  • Use: Normal
  • Capacity 7,5-8 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • N134 Hitech (2015-2021)
  • Front
  • Use: Normal
  • Capacity 7,5-8 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • N154 Hitech (2015-2021)
  • Front
  • Use: Normal
  • Capacity 7,5-8 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • N154e Hitech (2015-2021)
  • Front
  • Use: Normal
  • Capacity 7,5-8 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana
  • N174 Hitech (2015-2021)
  • Front
  • Use: Normal
  • Capacity 7,5-8 liter
  • Check 600 hours
  • Change 1200 hours/ 12 months
  • Code: Dana

Additional Notes

  • The front differential capacity across all N4 Hitech variants is listed as a range of 7.5 to 8 liters. A capacity expressed as a range rather than a fixed value typically reflects variation between fill conditions, such as the difference between a drain-and-refill service fill and the total system volume measured during a full overhaul or dry fill.
  • The Valtra (Valmet) N104 Hitech, N114 Hitech, N114e Hitech, N124 Hitech, N134 Hitech, N154 Hitech, N154e Hitech, and N174 Hitech all share an identical front differential capacity specification of 7.5 to 8 liters, indicating a common front axle assembly across the entire N4 Hitech lineup for the 2015-2021 period.
  • The front differential fluid check interval is set at 600 hours across all eight variants. In agricultural equipment, hour-based intervals are tied to engine operating hours logged on the machine's hourmeter, making the schedule dependent on actual field use rather than calendar time alone.
  • The fluid change interval combines two independent triggers: 1,200 operating hours or 12 months, whichever comes first. The dual-trigger format means a machine with low annual hours would still require a fluid change on a 12-month calendar basis, while a heavily used machine would reach the hour threshold before the annual deadline.
  • The check interval of 600 hours falls at exactly half the 1,200-hour change interval. This midpoint inspection is intended to monitor fluid condition and level between full change services, allowing early detection of contamination or fluid loss without requiring a complete drain and refill.
  • All specifications are designated for normal use conditions. In agricultural equipment service documentation, a normal use classification typically refers to standard field operation as opposed to severe conditions such as continuous heavy draft work, extreme temperature environments, or frequent water crossing, which would generally call for shortened intervals.
  • No variation in front differential capacity or service intervals exists across the N104, N114, N114e, N124, N134, N154, N154e, and N174 Hitech models for the 2015-2021 period. Despite the range spanning different engine output classes, the front differential specifications remain uniform throughout.

Other Systems