Valtra (Valmet) 4000 Metta

Coolant capacity & service interval

Valtra (Valmet) 4000 Metta coolant capacity ranges from 8,5 to 10 liters. Service intervals include checks every 10 hours and changes every 2000 hours or 24 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
4100 (Metta) (1994-1996)
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
4300 (Metta) (1994-1996)
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
4400 (Metta) (1994-1996)
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
4500 (Metta) (1994-1996)
  • Use: Normal
  • Capacity 8,5 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months
4600 (Metta) (1994-1996)
  • Use: Normal
  • Capacity 10 liter
  • Check 10 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valtra (Valmet) 4000 Metta cooling system capacity is 8.5 liters across the 4100, 4300, 4400, and 4500 variants for the 1994-1996 model years.
  • The 4600 (Metta) carries a 10-liter cooling system capacity, which is 1.5 liters greater than the four lower variants in the same 1994-1996 range.
  • A 10-liter cooling system capacity in the 4600 is consistent with a larger or higher-output engine requiring greater thermal management volume compared to the 8.5-liter systems in the smaller variants.
  • All five variants share an identical check interval of every 10 operating hours, a frequency typical of working machinery where coolant level and condition are monitored as part of routine pre-operation or daily inspection.
  • The coolant change interval across all five variants is set at 2000 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger structure means calendar time can mandate a change even when the hour threshold has not been reached.
  • A 2000-hour change interval is a relatively extended service cycle, reflecting the expectation that agricultural tractors in this class accumulate operating hours over multi-year periods rather than in short concentrated use.
  • The uniform change interval of 2000 hours or 24 months applies equally to the 8.5-liter and 10-liter systems, meaning the larger capacity of the 4600 does not correspond to a different service schedule.

Other Systems