Valtra (Valmet) 05 series

Manual transmission fluid capacity & service interval

Valtra (Valmet) 05 series manual transmission fluid capacity ranges from 23 to 95 liters. Service intervals include checking at 50 and 400 hours, and changing at 800 hours or 12 months and 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
2005 (1986-1990)
  • Use: Normal
  • Capacity 95 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
  • Code: 14/4
2105 (1986-1990)
  • Use: Normal
  • Capacity 95 liter
  • Check 50 hours
  • Change 2000 hours/ 24 months
  • Code: 14/4
305, 305-4 (1986-1991)
  • Use: Normal
  • Capacity 23 liter
  • Check 400 hours
  • Change 800 hours/ 12 months
  • Code: 8/4
405, 405-4 (1986-1991)
  • Use: Normal
  • Capacity 23 liter
  • Check 400 hours
  • Change 800 hours/ 12 months
  • Code: 8/4

Additional Notes

  • The Valtra (Valmet) 05 series 2005 and 2105 models, produced from 1986-1990, share an identical transaxle manual fluid capacity of 95 liters, a figure that reflects the large integrated transmission and axle housing typical of higher-output agricultural tractors where the transaxle serves multiple drivetrain functions simultaneously.
  • At 95 liters, the 2005 and 2105 transaxle fill volume is more than four times the 23-liter capacity specified for the 305, 305-4, 405, and 405-4 models, indicating a substantially larger combined transmission and axle assembly in the higher-numbered variants.
  • The 305, 305-4, 405, and 405-4 models, covering the 1986-1991 production span, carry a 23-liter transaxle capacity under normal use conditions, with a fluid check interval set at 400 hours and a change interval of 800 hours or 12 months, whichever comes first.
  • The 2005 and 2105 transaxle fluid check interval is specified at 50 hours under normal use, a notably shorter inspection cycle compared to the 400-hour check interval assigned to the smaller 305 and 405 series, suggesting more frequent monitoring is warranted for the larger-capacity system.
  • The change interval for the 2005 and 2105 transaxle is set at 2000 hours or 24 months under normal use conditions, which is 2.5 times longer in operating hours than the 800-hour or 12-month interval specified for the 305 and 405 series.
  • The 305-4 and 405-4 designations indicate four-wheel-drive variants, yet both share the same 23-liter transaxle capacity and identical service intervals as their two-wheel-drive counterparts within the same model year range of 1986-1991.

Other Systems