Valpadana 9600 Series
Brake fluid capacity & service interval
The Valpadana 9600 Series uses brake fluid with a capacity of 0.8 liter. The data covers 4 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 96105 ARR, Cummins QSB3.3 (2010-2016) |
|
| 96105 ISR, Cummins QSB3.3 (2010-2016) |
|
| 9695 ARR, Cummins B3.3 (2010-2016) |
|
| 9695 ISR, Cummins B3.3 (2010-2016) |
|
Additional Notes
- All four configurations in the Valpadana 9600 Series share a uniform brake fluid capacity of 0.8 liter across the 2010-2016 model years, applying to both the Cummins QSB3.3 and Cummins B3.3 engine variants.
- The 0.8 liter figure represents a service fill capacity for the hydraulic brake system, meaning the volume of fluid the system holds under normal operating conditions rather than a dry or overhaul fill.
- Both the 96105 ARR and 96105 ISR configurations, each fitted with the Cummins QSB3.3 engine, carry identical 0.8 liter brake fluid capacities, indicating no variation between the ARR and ISR designations within the 96105 sub-model.
- The same pattern holds for the 9695 sub-model, where the ARR and ISR variants with the Cummins B3.3 engine also share the 0.8 liter capacity, confirming consistency across steering or transmission configuration differences implied by those suffixes.
- All four rows are designated for normal use conditions, meaning the stated 0.8 liter capacity applies to standard operating environments without adjustment for severe-duty or extended-service scenarios.
- The hydraulic brake system note present across all configurations identifies the fluid circuit as a closed hydraulic loop, where the 0.8 liter capacity reflects the total volume of fluid circulating through the master cylinder, lines, and calipers or wheel cylinders.