Valpadana 6600 Series

Differential fluid capacity & service interval

Valpadana 6600 Series differential fluid capacity ranges from 1,8 to 2 liters. Service intervals occur every 1000 hours or 12 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 6660 ARM, Yanmar 4TNV84T (2010-2016)
  • Front
  • Use: Normal
  • Capacity 1,8-2 liter
  • Change 1000 hours/ 12 months
  • 6660 ISM, Yanmar 4TNV84T (2010-2016)
  • Front
  • Use: Normal
  • Capacity 1,8-2 liter
  • Change 1000 hours/ 12 months
  • 6660 ISR-REV, Yanmar 4TNV84T (2010-2016)
  • Front
  • Use: Normal
  • Capacity 1,8-2 liter
  • Change 1000 hours/ 12 months
  • 6660 VRM, Yanmar 4TNV84T (2010-2016)
  • Front
  • Use: Normal
  • Capacity 1,8-2 liter
  • Change 1000 hours/ 12 months
  • 6675 ARM, John Deere 4024 HF295 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 1,8-2 liter
  • Change 1000 hours/ 12 months
  • 6675 ISM, John Deere 4024 HF295 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 1,8-2 liter
  • Change 1000 hours/ 12 months
  • 6675 ISR-REV, John Deere 4024 HF295 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 1,8-2 liter
  • Change 1000 hours/ 12 months
  • 6675 VRM, John Deere 4024 HF295 (2010-2016)
  • Front
  • Use: Normal
  • Capacity 1,8-2 liter
  • Change 1000 hours/ 12 months

Additional Notes

  • All eight configurations in the Valpadana 6600 Series share an identical front differential fluid capacity range of 1.8 to 2 liters. A stated range rather than a single fixed value typically reflects acceptable variation between a drain-and-refill service fill and the full measured capacity of the housing.
  • The 6600 Series splits across two engine families: the Yanmar 4TNV84T, fitted to the 6660 variants, and the John Deere 4024 HF295, fitted to the 6675 variants. Despite the difference in engine supplier, the front differential fluid capacity and change interval are identical across both engine families.
  • Within each engine family, four transmission or drivetrain configurations are listed: ARM, ISM, ISR-REV, and VRM. All four share the same 1.8 to 2 liter front differential capacity, indicating the front differential housing is consistent across those variants regardless of transmission type.
  • The fluid change interval for all listed configurations is 1,000 hours or 12 months, whichever comes first, under normal use conditions. In agricultural and compact tractor service, a dual trigger of operating hours and calendar time is standard practice because seasonal or low-hour machines can still experience fluid degradation over time.
  • The 1,000-hour interval is a relatively moderate service frequency for a front differential in this equipment class. Shorter intervals are common in severe-use applications, but all rows here are classified under normal use conditions, which corresponds to the 1,000-hour or 12-month schedule.
  • The 2010-2016 production span applies uniformly to all eight configurations, meaning no mid-cycle specification changes to the front differential capacity or service interval are reflected across those model years.

Other Systems