Valpadana 3000 series

Coolant capacity & service interval

Valpadana 3000 series uses coolant with a capacity of 15 liters. Service intervals include checks at 100 hours and changes at 2000 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
3060 F (2018- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
3060 GE (2018- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
3070 F (2018- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
3070 GE (2018- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
3080 F (2018- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months
3080 GE (2018- )
  • Use: Normal
  • Capacity 15 liter
  • Check 100 hours
  • Change 2000 hours/ 24 months

Additional Notes

  • The Valpadana 3000 series cooling system capacity is 15 liters across all six configurations listed, covering the 3060 F, 3060 GE, 3070 F, 3070 GE, 3080 F, and 3080 GE variants. A uniform 15-liter figure across different model designations within the same series typically reflects a shared engine block or cooling circuit architecture.
  • The F and GE suffix variants within each power rating share identical cooling system capacities and service intervals. The 3060, 3070, and 3080 pairings each show no divergence between the F and GE configurations for any of the three specified values: capacity, check interval, or change interval.
  • Coolant checks are specified at every 100 hours of operation under normal use conditions. In hour-based service schedules common to agricultural and industrial equipment, a 100-hour check interval is a relatively frequent inspection point, consistent with monitoring fluid level and condition without performing a full drain and refill.
  • The coolant change interval is set at 2000 hours or 24 months, whichever comes first, under normal use conditions. The dual-trigger format means that calendar time alone can mandate a change even when the hourly threshold has not been reached, which is relevant for equipment operated at low annual hours.
  • The ratio between the check interval and the change interval is 20 to 1, meaning a coolant check is due 20 times before a full change is required under normal operating conditions. This structure allows for ongoing condition monitoring while spacing out the more labor-intensive drain and refill service.
  • All six configurations carry a 2018 starting year, and all specifications apply under normal use conditions. No severe-use or first-change-only variants are listed for any of the 3000 series cooling system entries.

Other Systems