Ursus C
Power steering fluid capacity & service interval
Ursus C power steering fluid has a capacity range of 1 to 4,5 liters. Service intervals include checking at 100 hours and changing at 800 hours. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
| C-362 (1974-1984) |
|
|
|
Additional Notes
- The Ursus C-335 2WD carries a power steering hydraulic system capacity of 1.5 liters, which is the largest figure among the 2WD configurations listed and reflects the volume required to fill the steering circuit during a standard service fill.
- Both the C-360 2WD and C-360-P 2WD share an identical 1-liter power steering hydraulic system capacity, despite the C-360-P representing a later and narrower production window of 1984-1988 compared to the C-360 2WD spanning 1976-1989.
- The C-362 stands apart from the other configurations with a substantially higher power steering capacity of 4.5 liters, a figure consistent with a larger integrated hydraulic circuit rather than a dedicated steering-only reservoir.
- For the C-362, a check interval of every 100 hours is specified under normal use conditions, indicating a relatively frequent inspection cycle relative to the change interval.
- The C-362 carries a fluid change interval of 800 hours under normal use, which in hour-based service schedules typical of agricultural machinery represents a full working season or more of field operation before a drain-and-refill is due.
- The C-335 2WD, C-360 2WD, and C-360-P 2WD rows carry no hour-based check or change intervals, with their specifications limited to capacity figures under normal use conditions.