Ursus Bison 200 series

Manual transmission fluid capacity & service interval

Ursus Bison 200 series requires manual transmission fluid with a capacity range of 45 to 50 liters. Service intervals consist of a check at 200 hours and a change at 400 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Bison 207 (2WD+4WD) (1987- )
  • Use: Normal
  • Capacity 45 liter
  • Check 200 hours
  • Change 400 hours
Bison 208 (2WD+4WD) (1987- )
  • Use: Normal
  • Capacity 45 liter
  • Check 200 hours
  • Change 400 hours
Bison 209 (2WD+4WD) (1987- )
  • Use: Normal
  • Capacity 45 liter
  • Check 200 hours
  • Change 400 hours
Bison 210 (2WD+4WD) (1987- )
  • Use: Normal
  • Capacity 45 liter
  • Check 200 hours
  • Change 400 hours
Bison 212 4WD (1987- )
  • Use: Normal
  • Capacity 50 liter
  • Check 200 hours
  • Change 400 hours
Bison 214 4WD (1987- )
  • Use: Normal
  • Capacity 50 liter
  • Check 200 hours
  • Change 400 hours

Additional Notes

  • The Ursus Bison 200 series manual transaxle specifications cover six variants within the lineup, spanning the Bison 207 through Bison 214, all with a starting year of 1987.
  • The Bison 207, 208, 209, and 210 — each available in both 2WD and 4WD configurations — share an identical manual transaxle fluid capacity of 45 liters. A 45-liter figure is characteristic of a large agricultural transaxle fill, reflecting the combined gearbox and axle housing volume typical of heavy-duty tractor driveline assemblies.
  • The Bison 212 4WD and Bison 214 4WD carry a higher manual transaxle capacity of 50 liters, representing a 5-liter increase over the lower-numbered variants in the same series.
  • All six variants share the same service interval structure under normal use conditions: a fluid level check at every 200 operating hours and a full fluid change at every 400 operating hours. Operating hours are the standard interval measurement for agricultural machinery, replacing the mileage-based intervals used in road vehicles.
  • The 400-hour change interval means fluid is renewed at twice the frequency of the 200-hour check interval, so each change event is preceded by exactly one intermediate check.
  • The specifications apply uniformly to both 2WD and 4WD configurations of the Bison 207, 208, 209, and 210, indicating no differentiation in transaxle fluid capacity or service intervals between the two drivetrain layouts for those models.
  • The Bison 212 and Bison 214 are listed exclusively as 4WD variants, and both share the 50-liter capacity and the same 200/400-hour check and change intervals as the rest of the series.

Other Systems