Track Marshall All models

Coolant capacity & service interval

Track Marshall All models use coolant with a capacity range of 15,9 to 22,7 liters. Service intervals include checks at 8 and 10 hours, with a change interval of 1000 hours. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TM 110 (1986- )
  • Use: Normal
  • Capacity 22,7 liter
  • Change 1000 hours
TM 120 (1986- )
  • Use: Normal
  • Capacity 22,7 liter
  • Change 1000 hours
TM 135 (1986- )
  • Use: Normal
  • Capacity 22,7 liter
  • Change 1000 hours
TM 155 (1986- )
  • Use: Normal
  • Capacity 22,7 liter
  • Change 1000 hours
Britannia (1984-1991)
  • Use: Normal
  • Capacity 15,9 liter
  • Check 8 hours
  • Change 1000 hours
TM 110 (1984-1986)
  • Use: Normal
  • Capacity 22,7 liter
  • Check 10 hours
  • Change 1000 hours
TM 120 (1984-1986)
  • Use: Normal
  • Capacity 22,7 liter
  • Check 10 hours
  • Change 1000 hours
TM 135 (1984-1986)
  • Use: Normal
  • Capacity 22,7 liter
  • Check 10 hours
  • Change 1000 hours

Additional Notes

  • The Track Marshall Britannia (1984-1991) carries a notably smaller cooling system capacity of 15.9 liters compared to the 22.7-liter capacity shared across the TM 110, TM 120, TM 135, and TM 155 models. The difference of roughly 6.8 liters reflects the Britannia's smaller engine displacement and cooling circuit size.
  • A 22.7-liter cooling system capacity is a substantial fill volume, typical of large-displacement agricultural or industrial crawler tractor engines where sustained high-load operation demands significant thermal management. All TM-series models in these specifications share this figure uniformly.
  • The Britannia's cooling system specifies a check interval of every 8 hours under normal use conditions. An 8-hour interval corresponds closely to a standard working day in agricultural operation, meaning the coolant level was expected to be verified at the start or end of each daily shift.
  • The TM 110, TM 120, and TM 135 models produced between 1984-1986 specify a coolant check interval of 10 hours under normal use conditions. A 10-hour check interval is slightly longer than the Britannia's 8-hour interval, suggesting a marginally lower monitoring frequency for those larger-capacity systems during that production period.
  • From 1986 onward, the TM 110, TM 120, and TM 135 specifications no longer list a periodic check interval, retaining only the 1000-hour change interval. The TM 155, introduced from 1986, also carries only the 1000-hour change interval with no check interval specified.
  • All models across the 1984-1991 range share a coolant change interval of 1000 hours under normal use conditions. In heavy-duty machinery, 1000 engine hours is a common benchmark for coolant replacement, as inhibitor packages within the coolant deplete over time and extended use can lead to corrosion or scale buildup within the cooling circuit.
  • The capacity figure of 22.7 liters appears consistently across all TM-series variants regardless of model year or specific model designation. In service contexts, a stated capacity at this level typically represents the total system fill volume, encompassing the engine block, cylinder head passages, radiator, and associated hoses rather than a partial or drain-and-refill figure.

Other Systems