Toro Utility vehicles

Automatic transmission fluid capacity & service interval

Toro Utility vehicles use Automatic transmission fluid with a capacity range of 1,4 to 7 liters. Service intervals include checking at 10 and 100 hours, and changing at 800 hours or 12 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Workman HD, 07369, 314000001->
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 800 hours
Workman HDX, 07366, 310000001->
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 800 hours
Workman HDX-D 4x4, 07368, 310000001->
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 800 hours
Workman HDX-D 4x4, 07368TC, 310000001->
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 800 hours
Workman HDX-D 4x4, 07371, 310000001->
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 800 hours
Workman HDX-D 4x4, 07371TC, 310000001->
  • Use: Normal
  • Capacity 7 liter
  • Check 10 hours
  • Change 800 hours
Workman MD, 07266TC, 314000001->
  • Use: Normal
  • Capacity 1,4 liter
  • Check 100 hours
  • Change 800 hours/ 12 months
Workman MD, 07279, 314000001->
  • Use: Normal
  • Capacity 1,4 liter
  • Check 100 hours
  • Change 800 hours/ 12 months
Workman MDX, 07273, 314000001->
  • Use: Normal
  • Capacity 1,4 liter
  • Check 100 hours
  • Change 800 hours/ 12 months
Workman MDX, 07273TC, 314000001->
  • Use: Normal
  • Capacity 1,4 liter
  • Check 100 hours
  • Change 800 hours/ 12 months

Additional Notes

  • The Toro Workman HD and Workman HDX series automatic transaxles carry a 7-liter fluid capacity, which is a notably large fill volume for a utility vehicle transaxle and reflects the heavier-duty construction of the HD-class drivetrain.
  • Across all six Workman HD and HDX-D 4x4 model numbers, the automatic transaxle check interval is set at 10 hours of operation under normal use conditions, a very short interval that points to the high mechanical stress placed on the transaxle in heavy-duty utility applications.
  • The Workman MD and MDX automatic transaxles hold 1.4 liters of fluid, a significantly smaller capacity than the 7-liter fill specified for the HD and HDX-D 4x4 models, consistent with the lighter-duty classification of the MD platform.
  • Workman MD and MDX models specify a fluid check interval of 100 hours under normal use conditions, ten times longer than the 10-hour check interval assigned to the HD and HDX-D 4x4 transaxles.
  • The Workman MD and MDX change interval is expressed as 800 hours or 12 months, whichever comes first. The addition of a calendar-based threshold means the fluid is replaced on a time basis even when hour accumulation is low, accounting for fluid degradation that occurs independently of operating hours.
  • The HD and HDX-D 4x4 transaxle change interval is stated solely as 800 hours, with no calendar-based limit. The MD and MDX specifications add the 12-month condition, making the two platform families distinct in how the change interval is triggered.
  • The Workman HDX-D 4x4 is represented by four separate model numbers, 07368, 07368TC, 07371, and 07371TC, all sharing identical 7-liter capacity, 10-hour check, and 800-hour change specifications for the automatic transaxle under normal use conditions.
  • All specifications across both the HD-class and MD-class models are designated for normal use conditions, meaning the stated intervals apply to standard operating environments rather than elevated-stress or severe-duty cycles.

Other Systems