Steyr M900

Brake fluid capacity & service interval

Steyr M900 brake fluid capacity is 0,4 liter. Service intervals are 2000 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
M948, M 948a (1995-1998)
  • Use: Normal
  • Capacity 0,4 liter
  • Change 2000 hours/ 24 months
M958, M958a Turbo (1995-1998)
  • Use: Normal
  • Capacity 0,4 liter
  • Change 2000 hours/ 24 months
M968, M968a Turbo (1995-1998)
  • Use: Normal
  • Capacity 0,4 liter
  • Change 2000 hours/ 24 months
M975a Turbo (1995-1998)
  • Use: Normal
  • Capacity 0,4 liter
  • Change 2000 hours/ 24 months

Additional Notes

  • The Steyr M900 series hydraulic brake system holds 0.4 liter of brake fluid across all four configurations covered in the 1995-1998 specifications, including the naturally aspirated M948 and M948a as well as the turbocharged M958a, M968a, and M975a variants.
  • A 0.4 liter capacity is consistent with a service fill volume, representing the fluid held within the hydraulic brake circuit rather than a larger overhaul or full-system displacement figure.
  • The brake fluid change interval is specified at 2000 hours or 24 months under normal use conditions, meaning the interval applies to standard operating environments rather than severe or demanding duty cycles.
  • The dual-format interval of 2000 hours and 24 months means whichever threshold is reached first would govern the service timing, a common approach for agricultural equipment that may accumulate hours at varying rates across calendar time.
  • The M948 and M948a share identical brake fluid capacity and change interval specifications with the turbocharged M958, M958a, M968, M968a, and M975a, indicating no differentiation in brake system fluid requirements between naturally aspirated and turbocharged engine configurations within the M900 range.

Other Systems