Steyr 6100/6200 CVT
Power steering fluid capacity & service interval
Steyr 6100/6200 CVT uses power steering fluid with a capacity of 52 liters. Service intervals include checking every 10 hours and changing every 500 hours or 12 months. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Steyr 6100/6200 CVT power steering function is served by a shared hydraulic system rather than a dedicated standalone reservoir, which accounts for the notably large 52-liter capacity figure across all five variants.
- All five variants covered by the specifications, the 6135, 6145, 6155, 6170, and 6190 CVT, carry an identical 52-liter hydraulic system and power steering fluid capacity for the 2004-2009 model years.
- A fluid level check interval of every 10 operating hours applies under normal use conditions across all listed variants, reflecting the frequent monitoring expectations typical of agricultural machinery hydraulic systems.
- The fluid change interval is set at 500 hours or 12 months, whichever comes first, under normal use conditions, meaning calendar time can trigger a change obligation even when the hourly threshold has not been reached.
- The uniform 500-hour or 12-month change interval across the 6135, 6145, 6155, 6170, and 6190 CVT variants indicates no differentiation in service scheduling based on engine output or model designation within the 2004-2009 range.
- The 52-liter capacity is consistent across all model designations in the 2004-2009 range, suggesting a common hydraulic platform architecture regardless of the power rating differences implied by the variant numbering.