Shibaura CM series

Automatic transmission fluid capacity & service interval

Shibaura CM series automatic transmission fluid capacity is 14 liter. Service intervals include 50 hours for checks and 600 hours for changes. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • CM214 (1998-2008)
  • Hydrostatic
  • Use: Normal
  • Capacity 14 liter
  • Check 50 hours
  • Change 600 hours

Additional Notes

  • The Shibaura CM214 carries an automatic transmission fluid capacity of 14 liters, which reflects a combined transmission and hydrostatic system fill rather than a simple gearbox-only volume.
  • Under normal use conditions, the CM214's 600-hour change interval is a time-in-operation figure typical of agricultural and compact utility equipment, where service intervals are measured in engine hours rather than distance traveled.
  • The 50-hour check interval on the CM214 sits well ahead of the 600-hour change interval, indicating that fluid level and condition monitoring is expected to occur roughly twelve times before a full drain and refill is due.
  • A 14-liter capacity for a combined transmission and hydrostatic circuit is consistent with systems where a single shared fluid reservoir serves both the gear-driven transmission functions and the hydraulic drive components simultaneously.

Other Systems