Schlüter Compact

Automatic transmission fluid capacity & service interval

Schlüter Compact automatic transmission fluid capacity ranges from 36 to 42 liters. Service intervals occur every 1050 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Compact 1050 T, Compact 1050 TV (1982-1990)
  • Hydraulic system
  • Use: Normal
  • Capacity 36 liter
  • Change 1050 hours/ 12 months
  • Code: 12/6
  • Compact 1050 V6 (1982-1990)
  • Hydraulic system
  • Use: Normal
  • Capacity 42 liter
  • Change 1050 hours/ 12 months
  • Code: 11/5
  • Compact 750, Compact 750 V (1982-1990)
  • Hydraulic system
  • Use: Normal
  • Capacity 36 liter
  • Change 1050 hours/ 12 months
  • Code: 12/6
  • Compact 850, Compact 850 V, Compact 850 V Special (1982-1990)
  • Hydraulic system
  • Use: Normal
  • Capacity 36 liter
  • Change 1050 hours/ 12 months
  • Code: 12/6

Additional Notes

  • The Schlüter Compact 1050 V6 carries a 42-liter transmission/hydraulic system capacity, which is notably larger than the 36-liter figure shared by the other Compact variants in the same lineup.
  • The 36-liter capacity applies across the Compact 750, Compact 750 V, Compact 850, Compact 850 V, Compact 850 V Special, Compact 1050 T, and Compact 1050 TV, indicating a shared transmission/hydraulic system architecture among those models.
  • All four model groupings specify a change interval of 1050 hours or 12 months under normal use conditions, meaning fluid replacement is triggered by whichever threshold is reached first.
  • The hour-based interval of 1050 hours reflects a machine-hours measurement common in agricultural and industrial equipment, where engine runtime rather than road distance serves as the primary service metric.
  • The 12-month calendar limit paired with the 1050-hour interval means that even low-utilization machines operating well below the hour threshold are still subject to an annual fluid change.
  • The capacity figures listed represent the full transmission/hydraulic system volume, which in tractors of this type typically encompasses both the gearbox and the hydraulic circuit sharing a common fluid reservoir.

Other Systems