Same Krypton

Automatic transmission fluid capacity & service interval

Same Krypton uses automatic transmission fluid with a capacity of 35 liters. Service intervals include checking every 50 hours and changing every 1200 hours or 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Krypton 3 110 Six (2015-2018)
  • Use: Normal
  • Capacity 35 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Krypton 3 100F, ->2001 (2000-2010)
  • Use: Normal
  • Capacity 35 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Krypton 3 110, ->2001 (2000-2010)
  • Use: Normal
  • Capacity 35 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months
Krypton 3 80 V N-M-L-C, ->2001 (2000-2010)
  • Use: Normal
  • Capacity 35 liter
  • Check 50 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • Across all listed configurations of the Same Krypton 3, the transaxle/transmission fluid capacity is 35 liters, which is a notably large fill volume consistent with heavy-duty agricultural or industrial transmission systems rather than passenger vehicle units.
  • The Krypton 3 100F, introduced before 2001 and covering model years 2000-2010, shares an identical 35-liter transaxle/transmission capacity with the Krypton 3 110 Six from 2015-2018, the Krypton 3 110 from 2000-2010, and the Krypton 3 80 V N-M-L-C from 2000-2010.
  • All four configurations carry a fluid check interval of every 50 hours of operation under normal use conditions, reflecting a time-in-service measurement approach typical of machinery rated by engine hours rather than distance traveled.
  • The change interval across all listed configurations is 1,200 hours or 24 months under normal use conditions, whichever comes first, meaning calendar time serves as an independent trigger alongside operational hours.
  • The Krypton 3 110 Six, spanning 2015-2018, represents a later production variant yet carries the same 35-liter capacity and identical check and change intervals as the earlier 2000-2010 configurations, indicating no revision to transmission service specifications between those generations.
  • A 24-month maximum change interval applies regardless of how slowly hours accumulate, so low-use units reaching the two-year mark under normal conditions are subject to a fluid change even if the 1,200-hour threshold has not been met.

Other Systems