Same Frutteto II

Power steering fluid capacity & service interval

Same Frutteto II uses power steering fluid with a capacity of 41 liters. Service intervals include checks every 300 hours and changes every 1200 hours or 12 months. The data covers 5 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Frutteto II 100 (2002-2005)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto II 55 (2002-2005)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto II 70 (2002-2005)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto II 75 (2002-2005)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Frutteto II 90 (2002-2005)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Same Frutteto II power steering circuit is integrated into a shared transaxle and hydraulic system, meaning the 41-liter capacity figure represents the total fill volume for all three interconnected systems rather than a dedicated power steering reservoir alone.
  • A 41-liter system capacity is a notably large volume, consistent with the combined demands of a tractor transaxle, hydraulic implement circuit, and power steering circuit drawing from a single shared fluid supply.
  • All five variants covered — the 55, 70, 75, 90, and 100 — carry an identical 41-liter capacity across the 2002-2005 model years, indicating no variation in reservoir sizing across the lineup despite differences in engine output.
  • The check interval is set at 300 hours under normal use conditions, which in tractor service terms represents a relatively frequent inspection point given the high fluid volume involved.
  • The change interval is specified at 1200 hours or 12 months, whichever comes first, applying a dual threshold that accounts for both operational hours and calendar-based fluid degradation.
  • The 12-month calendar limit means a machine accumulating fewer than 1200 hours annually is still subject to a fluid change on a yearly basis, reflecting the time-dependent breakdown properties of hydraulic fluid regardless of usage intensity.
  • The ratio between the check interval (300 hours) and the change interval (1200 hours) means the fluid level and condition are inspected at least four times before a full drain and refill is due under normal use conditions.

Other Systems