Same Argon Classic (F)

Power steering fluid capacity & service interval

Same Argon Classic (F) uses power steering fluid with a capacity of 41 liters. Service intervals include checking every 10 hours and changing every 1200 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Argon 55 Classic (2007-2014)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • Argon 70 Classic (2007-2014)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • Argon F 55 Classic (2007-2014)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
  • Argon F 70 Classic (2007-2014)
  • Transaxle/hydraulic system
  • Use: Normal
  • Capacity 41 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The Same Argon Classic (F) power steering fluid shares a combined reservoir with the transaxle and hydraulic system, meaning the 41-liter capacity figure covers all three functions within a single integrated circuit rather than a standalone power steering reservoir.
  • A 41-liter capacity is notably large by agricultural machinery standards, reflecting the demands of a full transaxle and hydraulic system that also feeds the power steering circuit.
  • The Argon 55 Classic and Argon 70 Classic both carry the same 41-liter capacity for the combined transaxle/hydraulic/power steering system across the 2007-2014 production span.
  • The Argon F 55 Classic and Argon F 70 Classic share the identical 41-liter capacity specification, indicating no volumetric difference between the standard and F-series variants in the combined fluid circuit.
  • All four configurations specify a fluid level check interval of every 10 operating hours, which is a short-cycle inspection interval consistent with high-load agricultural equipment where fluid loss or contamination can occur rapidly.
  • The change interval is set at 1,200 hours or 12 months under normal use conditions, whichever comes first, meaning calendar time can trigger a fluid change even when the hourly threshold has not been reached.
  • The 1,200-hour change interval applies uniformly across the 55 and 70 horsepower variants in both the standard and F-series configurations for the 2007-2014 model years.

Other Systems