Renault Cergos

Coolant capacity & service interval

Renault Cergos coolant capacity ranges from 13,5 to 14 liters. Service intervals include checks every 10 hours and changes every 1200 hours or 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Cergos 335 (2004-2005)
  • Use: Normal
  • Capacity 14 liter
Cergos 345 (2004-2005)
  • Use: Normal
  • Capacity 14 liter
Cergos 355 (2004-2005)
  • Use: Normal
  • Capacity 14 liter
Cergos 330 (1997-2003)
  • Use: Normal
  • Capacity 13,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Cergos 340 (1997-2003)
  • Use: Normal
  • Capacity 13,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
Cergos 350 (1997-2003)
  • Use: Normal
  • Capacity 13,5 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The Renault Cergos 330, 340, and 350 share an identical cooling system capacity of 13.5 liters across the 1997-2003 model years, indicating a common engine cooling architecture across those three variants in that period.
  • The 2004-2005 variants — the Cergos 335, 345, and 355 — each carry a cooling system capacity of 14 liters, a 0.5-liter increase over the earlier 13.5-liter figure seen in the corresponding 1997-2003 models.
  • A 13.5-liter cooling system capacity is a substantial volume, consistent with larger diesel agricultural or industrial engines where high thermal loads require significant coolant reserves to maintain stable operating temperatures.
  • The 1997-2003 variants specify a coolant level check interval of every 10 hours of operation under normal use conditions, reflecting the frequent monitoring typical of heavy-duty machinery subject to sustained engine loads.
  • The coolant change interval for the 1997-2003 Cergos 330, 340, and 350 is set at 1,200 hours or 24 months under normal use conditions, whichever comes first. The dual-trigger format means calendar time can mandate a change even when hour accumulation is low.
  • A 1,200-hour change interval is a common benchmark in agricultural machinery, where seasonal operation patterns mean calendar-based limits often become the governing factor rather than accumulated engine hours.

Other Systems