New Holland TN-VA

Brake fluid capacity & service interval

New Holland TN-VA brake fluid capacity ranges from 0,2 to 0,5 liters. Service intervals require a check every 10 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TN60VA (2006-2010)
  • Use: Normal
  • Capacity 0,5 liter
  • Capacity 0,2 liter (+ front brakes)
  • Check 10 hours
TN70VA (2006-2010)
  • Use: Normal
  • Capacity 0,5 liter
  • Capacity 0,2 liter (+ front brakes)
  • Check 10 hours
TN75VA (2006-2010)
  • Use: Normal
  • Capacity 0,5 liter
  • Capacity 0,2 liter (+ front brakes)
  • Check 10 hours
TN95VA (2006-2010)
  • Use: Normal
  • Capacity 0,5 liter
  • Capacity 0,2 liter (+ front brakes)
  • Check 10 hours

Additional Notes

  • The New Holland TN-VA series covers four variants across the 2006-2010 model years: the TN60VA, TN70VA, TN75VA, and TN95VA, all sharing identical brake fluid specifications for the hydraulic brake system.
  • Each variant carries a base brake fluid capacity of 0.5 liter, which represents the standard rear brake circuit fill volume for the hydraulic brake system.
  • An additional 0.2 liter of brake fluid is specified when front brakes are present, bringing the total system capacity to 0.7 liter in front brake configurations.
  • The split between the base 0.5 liter and the supplemental 0.2 liter reflects the separate hydraulic circuits serving the rear and front brake assemblies respectively.
  • A brake fluid check interval of every 10 hours is specified under normal use conditions across all four TN-VA variants, indicating a relatively frequent inspection schedule consistent with agricultural equipment operating in demanding field environments.
  • The uniform capacity and interval figures across the TN60VA, TN70VA, TN75VA, and TN95VA suggest the hydraulic brake system architecture is shared regardless of the power rating differences between the variants.

Other Systems