New Holland T8000

Differential fluid capacity & service interval

New Holland T8000 differential fluid capacity ranges from 11,8 to 13,25 liters. Service intervals include checking at 300 hours and changing at 1200 hours or 12 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • T8010 (2007-2011)
  • Front, with 10 bolts
  • Use: Normal
  • Capacity 12,3 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • T8010 (2007-2011)
  • Front, with 12 bolts
  • Use: Normal
  • Capacity 11,8 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • T8020 (2007-2011)
  • Front, with 10 bolts
  • Use: Normal
  • Capacity 12,3 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • T8020 (2007-2011)
  • Front, with 12 bolts
  • Use: Normal
  • Capacity 11,8 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • T8030 (2007-2011)
  • Front, with 10 bolts
  • Use: Normal
  • Capacity 12,3 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • T8030 (2007-2011)
  • Front, with 12 bolts
  • Use: Normal
  • Capacity 11,8 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • T8040 (2007-2011)
  • Front, with 10 bolts
  • Use: Normal
  • Capacity 12,3 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • T8040 (2007-2011)
  • Front, with 12 bolts
  • Use: Normal
  • Capacity 11,8 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • T8050 (2007-2011)
  • Front, with 10 bolts
  • Use: Normal
  • Capacity 12,3 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • T8050 (2007-2011)
  • Front, with 12 bolts
  • Use: Normal
  • Capacity 11,8 liter (Standard)
  • Capacity 13,25 liter (Supersteer)
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • Across the New Holland T8000 series (T8010 through T8050, 2007-2011), the front differential fluid capacity varies depending on whether the axle housing uses a 10-bolt or 12-bolt configuration, with 10-bolt units holding 12.3 liters in Standard form versus 11.8 liters for 12-bolt units in Standard form.
  • The Supersteer axle variant carries a uniform 13.25-liter capacity across all T8000 models and both bolt configurations, which is notably higher than either Standard capacity figure, reflecting the additional internal volume associated with the Supersteer steering geometry hardware.
  • The 0.5-liter difference between the 10-bolt Standard capacity (12.3 liters) and the 12-bolt Standard capacity (11.8 liters) is consistent across all five model variants in the T8000 lineup, indicating a housing volume difference tied to the bolt count rather than to the specific model designation.
  • A fluid level check interval of 300 hours applies to all front differential configurations across the T8000 series under normal use conditions, which in agricultural equipment terms represents a relatively frequent inspection point given typical seasonal operating patterns.
  • The fluid change interval is specified at 1,200 hours or 12 months, whichever comes first, under normal use conditions. The dual-trigger format means calendar time can mandate a change even when the hourly threshold has not been reached, which is relevant for equipment operated at lower annual hours.
  • At the 1,200-hour change interval, a single Supersteer front differential requires 13.25 liters of fluid per service, compared to 12.3 liters for a 10-bolt Standard unit or 11.8 liters for a 12-bolt Standard unit, a difference that affects fluid procurement quantities across a mixed fleet of T8000 machines.
  • The ratio of the check interval to the change interval is exactly 1:4, meaning four level inspections at 300-hour increments occur before a full fluid change is due at 1,200 hours, a structure common in heavy agricultural drivetrain service schedules.

Other Systems