New Holland T7000

Coolant capacity & service interval

New Holland T7000 coolant capacity ranges from 22,5 to 26 liters. Service intervals include checks every 10 hours and changes every 1200 hours or 12 months. The data covers 9 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
T7030, Power Command/Auto Command (2009-2011)
  • Use: Normal
  • Capacity 22,5 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
T7040, Power Command/Auto Command (2009-2011)
  • Use: Normal
  • Capacity 22,5 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
T7050, Power Command/Auto Command (2009-2011)
  • Use: Normal
  • Capacity 22,5 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
T7060, Power Command/Auto Command (2009-2011)
  • Use: Normal
  • Capacity 22,5 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
T7070, Power Command/Auto Command (2009-2011)
  • Use: Normal
  • Capacity 22,5 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
T7030, Power Command (2007-2009)
  • Use: Normal
  • Capacity 26 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
T7040, Power Command (2007-2009)
  • Use: Normal
  • Capacity 26 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
T7050, Power Command (2007-2009)
  • Use: Normal
  • Capacity 26 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months
T7060, Power Command (2007-2009)
  • Use: Normal
  • Capacity 26 liter
  • Check 10 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • The New Holland T7000 series cooling system capacity splits into two distinct values across the model range: 26 liters for Power Command configurations produced in 2007-2009, and 22.5 liters for Power Command and Auto Command configurations produced in 2009-2011. The 3.5-liter difference between generations is consistent across the T7030, T7040, T7050, and T7060 variants.
  • The 26-liter cooling system capacity applies exclusively to the 2007-2009 Power Command transmission variants of the T7030, T7040, T7050, and T7060. A capacity at this level is typical of larger agricultural engine cooling circuits, where extended thermal mass helps manage heat load during sustained field operation.
  • The 22.5-liter cooling system capacity is shared across all 2009-2011 configurations, including both Power Command and Auto Command transmission variants of the T7030, T7040, T7050, T7060, and T7070. The T7070 is only listed with the 22.5-liter specification, as no 2007-2009 Power Command variant appears for that model.
  • All configurations across the T7000 series carry a coolant check interval of 10 hours. In agricultural equipment, a 10-hour check interval aligns with daily or near-daily inspection routines, reflecting the high thermal and mechanical demands placed on cooling systems during continuous field use.
  • The coolant change interval is specified at 1200 hours or 12 months for all listed configurations, whichever comes first. The dual-trigger format, combining an hours-based threshold with a calendar-based limit, accounts for machines that accumulate operating hours slowly, ensuring coolant degradation over time does not go unaddressed regardless of usage intensity.
  • The 1200-hour change interval is classified under normal use conditions for every row in the specification set. In service interval terminology, normal use typically refers to operation within standard load and environmental parameters, as opposed to severe conditions such as extreme dust, temperature, or continuous maximum-load operation.
  • The overlap year of 2009 is significant across the T7030, T7040, T7050, and T7060 variants, as both the 26-liter and 22.5-liter specifications are associated with that year depending on transmission type. Units produced in 2009 with Power Command transmissions retain the earlier 26-liter figure, while 2009 Power Command and Auto Command units follow the revised 22.5-liter specification.

Other Systems