New Holland Ford 60, Fiatagri M

Differential fluid capacity & service interval

New Holland Ford 60 and Fiatagri M models utilize differential fluid with a capacity range of 9 to 14 liters. Service intervals include checking at 300 hours and changing at 1200 hours or 12 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Ford 8160, Fiatagri M 100 (1996-1999)
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Ford 8260, Fiatagri M 115 (1996-1999)
  • Front
  • Use: Normal
  • Capacity 9 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Ford 8360, Fiatagri M 135 (1996-1999)
  • Front
  • Use: Normal
  • Capacity 14 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months
  • Ford 8560, Fiatagri M 160 (1996-1999)
  • Front
  • Use: Normal
  • Capacity 14 liter
  • Check 300 hours
  • Change 1200 hours/ 12 months

Additional Notes

  • Across the 1996-1999 Ford 60 / Fiatagri M lineup, front differential fluid capacities fall into two distinct groups: 9 liters for the lower models and 14 liters for the higher ones.
  • The Ford 8160 and Ford 8260 share an identical front differential capacity of 9 liters, indicating a common front axle assembly between those two models.
  • The Ford 8360 and Ford 8560 each carry a 14-liter front differential capacity, a notably larger fill volume that reflects a heavier-duty front axle design suited to the higher output of those models.
  • The difference between the 9-liter and 14-liter capacities represents a 56 percent increase in fluid volume, which generally corresponds to a physically larger differential housing with greater load-bearing requirements.
  • All four models share an identical fluid check interval of every 300 hours under normal use conditions, regardless of the capacity difference between the two axle groups.
  • The fluid change interval is uniform across all four models at 1200 hours or 12 months under normal use conditions, whichever comes first, meaning time elapsed is a valid trigger even when the hour threshold has not been reached.
  • A 1200-hour change interval on a front differential is relatively extended for agricultural equipment, reflecting the sealed, lower-contamination environment of a front axle differential compared to systems exposed to more frequent thermal cycling or contamination ingress.

Other Systems