New Holland CSX7000

Brake fluid capacity & service interval

New Holland CSX7000 requires 0,6 liter of brake fluid. Service intervals include checking every 10 hours and changing every 1200 hours or 24 months. The data covers 8 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
CSX7040, S/N 1720-> (2007-2012)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
CSX7050, S/N 1720-> (2007-2012)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
CSX7050 Laterale, S/N 1720-> (2007-2012)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
CSX7060, S/N 1720-> (2007-2012)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
CSX7060 Laterale, S/N 1720-> (2007-2012)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
CSX7070, S/N 1720-> (2007-2012)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
CSX7080, S/N 1720-> (2007-2012)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months
CSX7080 Laterale, S/N 1720-> (2007-2012)
  • Use: Normal
  • Capacity 0,6 liter
  • Check 10 hours
  • Change 1200 hours/ 24 months

Additional Notes

  • The New Holland CSX7000 series hydraulic brake system holds a uniform capacity of 0.6 liter across all listed variants, including the CSX7040, CSX7050, CSX7060, CSX7070, and CSX7080, covering both standard and Laterale configurations from 2007-2012.
  • All specifications apply to serial numbers from 1720 onward, meaning units produced before that serial number threshold fall outside the scope of these figures.
  • The 0.6 liter capacity reflects the fluid volume held within the hydraulic brake circuit itself, a relatively small reservoir volume consistent with the closed, pressurized nature of hydraulic brake systems in agricultural machinery of this class.
  • A check interval of every 10 operating hours is specified across all variants. In agricultural equipment, such a short inspection cycle reflects the demanding and variable operating conditions typical of harvest machinery, where brake system integrity is critical to safe operation.
  • The change interval is set at 1,200 hours or 24 months, whichever comes first. The dual-condition format means time elapsed can trigger a fluid change even when the hour threshold has not been reached, which is relevant for machines used seasonally with lower annual operating hours.
  • The "Laterale" designation on the CSX7050, CSX7060, and CSX7080 variants refers to a lateral or side-mounted straw chopper configuration. Despite this structural difference from the standard variants, the hydraulic brake system capacity and service intervals remain identical across both configurations within each model.
  • The consistency of brake fluid specifications across all eight variants in the CSX7000 series from 2007-2012 indicates a shared hydraulic brake system architecture throughout the lineup, regardless of model-level differences in harvesting capacity or equipment configuration.

Other Systems