Mengele Mammut

Manual transmission fluid capacity & service interval

Mengele Mammut manual transmission fluid capacity ranges from 6 to 6,8 liters. Service intervals require a change every 12 months. The data covers 10 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Mammut 5800 (1994- )
  • Use: Normal
  • Capacity 6 liter
  • Change 12 months
  • Code: (4x2) 3/3
Mammut 5800 (1994- )
  • Use: Normal
  • Capacity 6,8 liter
  • Change 12 months
  • Code: (4x4) 3/3
Mammut 6300 (1994- )
  • Use: Normal
  • Capacity 6 liter
  • Change 12 months
  • Code: (4x2) 3/3
Mammut 6300 (1994- )
  • Use: Normal
  • Capacity 6,8 liter
  • Change 12 months
  • Code: (4x4) 3/3
Mammut 6800 (1994- )
  • Use: Normal
  • Capacity 6 liter
  • Change 12 months
  • Code: (4x2) 3/3
Mammut 6800 (1994- )
  • Use: Normal
  • Capacity 6,8 liter
  • Change 12 months
  • Code: (4x4) 3/3
Mammut 7300 (1994- )
  • Use: Normal
  • Capacity 6 liter
  • Change 12 months
  • Code: (4x2) 3/3
Mammut 7300 (1994- )
  • Use: Normal
  • Capacity 6,8 liter
  • Change 12 months
  • Code: (4x4) 3/3
Mammut 7800 (1994- )
  • Use: Normal
  • Capacity 6 liter
  • Change 12 months
  • Code: (4x2) 3/3
Mammut 7800 (1994- )
  • Use: Normal
  • Capacity 6,8 liter
  • Change 12 months
  • Code: (4x4) 3/3

Additional Notes

  • The Mengele Mammut manual transaxle specifications list two distinct fluid capacities across all five variants — 6 liters and 6.8 liters — with the 0.8-liter difference between the two values typically reflecting different fill procedures, such as a service drain-and-fill versus a more complete overhaul fill that accounts for residual fluid in additional passages or components.
  • Both capacity figures apply under normal use conditions, meaning neither the 6-liter nor the 6.8-liter value is reserved for a severe-duty or first-change scenario.
  • The 12-month change interval is consistent across all rows for every Mammut variant covered, establishing an annual fluid exchange cycle regardless of which capacity figure applies.
  • The Mammut 5800, 6300, 6800, 7300, and 7800 all share the same pair of capacity values — 6 liters and 6.8 liters — indicating no variation in transaxle fluid volume specifications across the different model designations within the Mammut range starting from 1994.
  • All specifications are categorized under the transaxle, manual note, which distinguishes the unit as a combined transmission and axle assembly rather than a standalone gearbox, a configuration common in agricultural and heavy equipment where the drivetrain is integrated into a single housing.

Other Systems