McCormick X4 Series
Differential fluid capacity & service interval
McCormick X4 Series differential fluid capacity is 7,5 liters. Service intervals occur every 1000 hours or 12 months. The data covers 14 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The McCormick X4 Series front differential fluid capacity is 7.5 liters across all listed variants, from the X4.20 through the X4.70. In a front axle differential housing that also contains integrated brakes, a 7.5-liter fill volume reflects the additional fluid demand of wet-brake components sharing the same oil bath as the differential gears.
- The front differential on all listed X4 Series configurations is specific to 4x4 drivetrains. The notation "with brakes" indicates a wet-brake axle design, where the braking elements are immersed in the differential fluid rather than operating as dry external components.
- The service interval for all listed configurations is 1,000 hours or 12 months, whichever comes first. The dual-trigger structure, combining an operating-hour threshold with a calendar limit, accounts for tractors that accumulate hours slowly and would otherwise go extended calendar periods between fluid changes.
- All front differential fluid intervals in the specifications are classified under normal use conditions. A normal-use classification in agricultural equipment typically reflects standard field and road operation, as opposed to severe-duty classifications that would apply to sustained heavy draft loads or extreme environmental exposure.
- The X4 Series spans multiple engine families across the 2017-2022 model range. Deutz engines appear in Tier 4 Final (T4f) and Tier 4 Interim (T4i) emissions configurations, while the X4.35 uses a Perkins 1104D-44 engine rated to Tier 3. Despite the variation in engine supplier and emissions tier, the front differential fluid capacity and change interval remain identical across all configurations.
- The X4.50 is the only model in the listed specifications paired with two distinct engine options: the Deutz C4DT58 in T4f configuration and the Deutz C4DT62 in T4i configuration. Both share the same 7.5-liter front differential capacity and 1,000-hour/12-month service interval, indicating the front axle assembly is common between the two engine variants on that model.